DJI Zenmuse L1 LiDAR

DJI Zenmuse L1 LiDAR

The DJI Zenmuse L1 LiDAR payload, (often referred to as DJI L1) for the Matrice 300 series is based on the Livox LiDAR module, which provides a great level of detail whilst reducing Size, Weight and Power (SWaP) requirements. It features a 20MP visual camera for point cloud colouring that facilitates the creation of highly detailed models.

SKU: DJI-L1 Category: Vertical: Brand:

Manufacturer Link:

£13,000.00 (Ex VAT)

A LIDAR + RGB SOLUTION FOR AERIAL SURVEYING

EXCEPTIONAL EFFICIENCY

Acquire 2 km2 of point cloud data in a single flight or produce true-colour point cloud models in real-time using the Livox frame Lidar module with a 70°FOV and a visible light camera with a 1-inch sensor.

UNPARALLELED ACCURACY

Render centimetre-accurate reconstructions due to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

READY WHEN YOU ARE

The IP44 rating allows the Zenmuse L1 to be operated in damp environments, such as rain or fog. The Lidar module’s active scanning method enables you to fly in the dark.

Visualise data as you fly

LIVOX LIDAR MODULE

– Frame Lidar with up to 100% effective point cloud results

– Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)

– Effective Point Rate: 240,000 pts/s

– Supports 3 Returns 

– Line Scan Mode and Non-repetitive Scan Mode

Everything in view

RGB CAMERA

20MP –

1-inch CMOS –

Mechanical Shutter –

Accurate details at your disposal

HIGH-ACCURACY IMU

– Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)

– Vision Sensor for Positioning Accuracy

– GNSS, IMU, RGB Data Fusion

RECREATE THE WORLD IN 3D POINT CLOUDS

POINT CLOUD LIVEVIEW

Real-time point clouds deliver instant insights onsite, this enables operators to be informed to make important decisions quickly. You also have the ability to verify fieldwork quality immediately after each flight by checking point cloud data.

MEASUREMENT AND ANNOTATION

With the Zenmuse L1, you can develop and communicate critical dimensions on the point cloud model using measurements and annotations.

ONE-STOP POST-PROCESSING

DJI Terra fuses the IMU and GNSS data for point cloud and visible light calculations, in addition to conducting POS data calculations so you can easily generate reconstructed models and accuracy reports.

Product Enquiry

Please complete and send the form below if you would like to know pricing and availability. If you would like any advice, please contact us.

Let's talk

by phone:

by EMAIL: